Abstract
Biodegradable polymer stent with shape memory effect is expected to be developed in the treatment of esophageal stenosis, most likely due to traditional stents having such shortages as considerable rigidity and nondegradation. A tubular stent with the inner and outer diameters of 28 and 30 mm was manufactured from biodegradable poly(ε-caprolactone-co-dl-lactide) (PCLA) copolymer consisting of ε-caprolactone and dl-lactide at a weight ratio of 10/90. A series of tests were accomplished to investigate its properties including shape memory effects (SMEs), compression property and influence of in vitro degradation of polymer matrix on its shape recovery and dilation force. Significantly, an implantation of the stent into a dog model was performed to evaluate its function for the treatment of esophageal stenosis. The deformed stent needs about 36 s to recover its initial shape in vitro in 37°C warm water. The primary animal experiment in vivo has revealed that the implanted deformed stent could be triggered by body temperature and expectedly returned to a nearly-round shape to support esophageal wall. Therefore, the biodegradable intelligent polymer stent may be great potential to displace the conventional metallic stents for the esophageal stenosis therapy.
Similar content being viewed by others
References
Kajzer W, Kaczmarek M, Marciniak J. Biomechanical analysis of stent-oesophagus system. J Mater Process Technol. 2005;162–163:196–202.
Guo Q, Guo S, Wang Z. A type of esophageal stent coating composed of one 5-fluorouracil-containing EVA layer and one drug-free protective layer: in vitro release, permeation and mechanical properties. J Control Release. 2007;118:318–24.
Ryhänen J, Kallioinen M, Tuukkanen J, Junila J, Niemelä E, Sandvik P, et al. In vivo biocompatibility evaluation of nickel-titanium shape memory metal alloy: muscle and perineural tissue responses and encapsule membrane thickness. J Biomed Mater Res A. 1998;41:481–8.
Kajzer W, Chrzanowski W, Marciniak J. Corrosion resistance of Cr-Ni-Mo steel intended for urological stents. Int J Microstruct Mater. 2007;2:188–201.
Kajzer W, Kaczmarek M, Krauze A, Marciniak J. Surface modification and corrosion resistance of Ni–Ti alloy used for urological stents. J Ach Mater Manuf Eng. 2007;20(1–2):123–6.
Kajzer W, Kaczmarek M, Krauze A, Marciniak J. Surface modification and corrosion behavior of Ni-Ti alloy used for urological implants. Arch Mater Sci. 2007;28:525–32.
Lewis AL, Tolhurst LA, Stratford PW. Analysis of a phosphorylcholine-based polymer coating on a coronary stent pre- and post-implantation. Biomaterials. 2002;23:1697–706.
Mani G, Feldman MD, Patel D, Agrawal CM. Coronary stents: a materials perspective. Biomaterials. 2007;28:1689–710.
Venkatraman S, Poh TL, Vinalia T, Mak KH, Boey F. Collapse pressures of biodegradable stents. Biomaterials. 2003;24:2105–11.
Takeshita F, Takata H, Ayukawa Y, Suetsugu T. Histomorphometric analysis of the response of rat tibiae to shape memory alloy (nitinol). Biomaterials. 1997;18:21–5.
Rondelli G, Vicentini B. Effect of copper on the localized corrosion resistance of Ni–Ti shape memory alloy. Biomaterials. 2002;23:639–44.
Wang M, Sze D, Wang Z, Wang Z, Gao Y, Dake M. Delayed complications after esophageal stent placement for treatment of malignant esophageal obstructions and esophagorespiratory fistulas. J Vasc Interven Radiol. 2001;12:465–74.
Song HY, Park SI, Do YS, Yoon HK, Sung KB, Sohn KH, Min YI. Expandable metallic stent placement in patients with benign esophageal strictures: results of long-term follow-up. Radiology. 1997;203:131–6.
Rico FR, Panzer AM, Kooros K, Rossi TM, Pegoli WJ. Use of polyflex airway stent in the treatment of perforated esophageal stricture in an infant: a case report. J Pediat Surg. 2007;42:E5–8.
Nguyen N, Shah J. Traversing difficult esophageal strictures from the oral approach. Tech Gastrointest Endosc. 2008;10:142–8.
Holm AN, a Levy JG, Gostout CJ, Topazian MD, Baron TH. Self-expanding plastic stents in treatment of benign esophageal conditions. Gastrointest Endosc. 2008;67:20–5.
Lendlein A, Langer R. Biodegradable, elastic shape-memory polymers for potential biomedical applications. Science. 2002;296:1673–6.
Lendlein A, Kratz K, Kelch S. Smart implant materials. Med Device Technol. 2005;16(3):12–4.
Alteheld A, Feng Y, Kelch S, Lendlein A. Biodegradable, amorphous copolyester-urethane networks having shape-memory properties. Angew Chem Int Ed. 2005;44(8):1188–92.
Lendlein A, Schmidt AM, Schroeter M, Langer R. Shape-memory polymer networks from Oligo (ε-caprolactone) Dimethacrylates. J Polym Sci A. 2005;43:1369–81.
Zheng X, Zhou S, Li X, Wen J. Shape memory properties of poly (D, L-lactide)/hydroxyapatite composites. Biomaterials. 2006;27:4288–95.
Zhou S, Deng X, Yang H. Biodegradable poly(ε-caprolactone)-poly(ethylene glycol) block copolymers: characterization and their use as drug carriers for a controlled delivery system. Biomaterials. 2003;24:3563–70.
Liu YP, Gall K, Dunn ML, Greenberg AR, Diani J. Thermomechanics of shape memory polymers: uniaxial experiments and constitutive modeling. Int J Plast. 2006;22:279–313.
GÖpferich A. Degradation of biodegradable polymers. Biodegradable polymers—from monomer to the clinic. In: 6th world biomaterials congress, USA, 2000.
Gorna K, Gogolewski S. The effect of gamma radiation on molecular stability and mechanical properties of biodegradable polyurethanes for medical applications. Polym Degrad Stab. 2003;79:465–74.
Horan RL, Antle K, Collette AL. In vitro degradation of silk fibroin. Biomaterials. 2005;26:3385–93.
Liao K, Quan D, Lu Z. Effects of physical aging on glass transition behavior of poly (dl-lactide). Eur Polym J. 2002;38:157–62.
Ho CH, Vu-Khanh T. Physical aging and time–temperature behavior concerning fracture performance of polycarbonate. Theor Appl Fract Mech. 2004;41:103–14.
Leblanc N, Saiah R, Beucher E, Gattin R, Castandet M, Saiter JM. Structural investigation and thermal stability of new extruded wheat flour based polymeric materials. Carbohyd Polym. 2008;73:548–57.
Takahara K, Saito H, Inoue T. Physical aging in poly(methyl methacrylate) glass: densification via density fluctuation. Polymer. 1999;40:3729–33.
Zheng X, Zhou S, Yu X, Li X, Feng B, Qu S, Weng J. Effect of in vitro degradation of poly(d, l-lactide)/β-tricalcium composite on its shape-memory properties. J Biomed Mater Res B Appl Biomater. 2008;86B:170–80.
Ferry JD. Viscoelastic properties of polymers. New York: Wiley Press; 1961.
Lorenzo V, Díaz-Lantada A, Lafont P, Lorenzo-Yustos H, Fonseca C, Acosta J. Physical ageing of a PU-based shape memory polymer: influence on their applicability to the development of medical devices. Mater Des. 2009;30:2431–4.
Fox TG, Flory PJ. Viscosity-molecular weight and viscosity-temperature relationships for polystyrene and polyisobutylene. J Am Chem Soc. 1948;70(7):2384–95.
Fox TG, Flory PJ. Second-order transition temperatures and related properties of polystyrene. I. Influence of molecular weight. J Appl Phys. 1950;21:581–91.
Qian R. Several basic questions on the cohesional state of polymers. Special propositions of polymer chemistry and physics. Guangzhou: Zhongshan University Press; 1984. p. 139.
Qian R, Wu L, Shen D, Napper HD, Mann RA, Sangster DF. Single-chain polystyrene glasses. Macromolecules. 1993;26(11):2950–3.
Acknowledgements
This work was partially supported by National Natural Science Foundation of China (50773065), Sichuan Prominent Young Talent Program (08ZQ026-040) and Scientific Research Project of Sichuan Provincial Health Department (090177).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yu, X., Wang, L., Huang, M. et al. A shape memory stent of poly(ε-caprolactone-co-dl-lactide) copolymer for potential treatment of esophageal stenosis. J Mater Sci: Mater Med 23, 581–589 (2012). https://doi.org/10.1007/s10856-011-4475-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10856-011-4475-4