Abstract
A new Bernoulli–Euler beam model is developed using a modified couple stress theory and a surface elasticity theory. A variational formulation based on the principle of minimum total potential energy is employed, which leads to the simultaneous determination of the equilibrium equation and complete boundary conditions for a Bernoulli–Euler beam. The new model contains a material length scale parameter accounting for the microstructure effect in the bulk of the beam and three surface elasticity constants describing the mechanical behavior of the beam surface layer. The inclusion of these additional material constants enables the new model to capture the microstructure- and surface energy-dependent size effect. In addition, Poisson’s effect is incorporated in the current model, unlike existing beam models. The new beam model includes the models considering only the microstructure dependence or the surface energy effect as special cases. The current model reduces to the classical Bernoulli–Euler beam model when the microstructure dependence, surface energy, and Poisson’s effect are all suppressed. To demonstrate the new model, a cantilever beam problem is solved by directly applying the general formulas derived. Numerical results reveal that the beam deflection predicted by the new model is smaller than that by the classical beam model. Also, it is found that the difference between the deflections predicted by the two models is very significant when the beam thickness is small but is diminishing with the increase of the beam thickness.
Similar content being viewed by others
References
Cammarata R.C.: Surface and interface stress effects in thin films. Prog. Surf. Sci. 46, 1–38 (1994)
Chen Y., Lee J.D., Eskandarian A.: Atomistic viewpoint of the applicability of microcontinuum theories. Int. J. Solids Struct. 41, 2085–2097 (2004)
Ellis R.W., Smith C.W.: A thin-plate analysis and experimental evaluation of couple-stress effects. Exp. Mech. 7, 372–380 (1967)
Eringen A.C.: On differential equations of nonlocal elasticity and solutions of screw dislocation and surface waves. J. Appl. Phys. 54, 4703–4710 (1983)
Eringen A.C., Edelen D.G.B.: On nonlocal elasticity. Int. J. Eng. Sci. 10, 233–248 (1972)
Gao X.-L.: An expanding cavity model incorporating strain-hardening and indentation size effects. Int. J. Solids Struct. 43, 6615–6629 (2006)
Gao, X.-L., Huang, J.X., Reddy, J.N.: A non-classical third-order shear deformation plate model based on a modified couple stress theory. Acta Mech. (published on-line on May. 30, 2013) (2013). doi:10.1007/s00707-013-0880-8
Gao X.-L., Ma H.M.: Solution of Eshelby’s inclusion problem with a bounded domain and Eshelby’s tensor for a spherical inclusion in a finite spherical matrix based on a simplified strain gradient elasticity theory. J. Mech. Phys. Solids 58, 779–797 (2010)
Gao X.-L., Mall S.: Variational solution for a cracked mosaic model of woven fabric composites. Int. J. Solids Struct. 38, 855–874 (2001)
Gao, X.-L., Zhou, S.-S.: Strain gradient solutions of half-space and half-plane contact problems. Z. Angew. Math. Phys. (published on-line on Nov. 7, 2012) (2012). doi:10.1007/s00033-012-0273-1
Gurtin M.E., Murdoch A.I.: A continuum theory of elastic material surfaces. Arch. Ration. Mech. Anal. 57, 291–323 (1975)
Gurtin M.E., Murdoch A.I.: Surface stress in solids. Int. J. Solids Struct. 14, 431–440 (1978)
Hutchinson J.W.: Plasticity at the micron scale. Int. J. Solids Struct. 37, 225–238 (2000)
Lam D.C.C., Yang F., Chong A.C.M., Wang J., Tong P.: Experiments and theory in strain gradient elasticity. J. Mech. Phys. Solids 51, 1477–1508 (2003)
Lazopoulos K.A., Lazopoulos A.K.: Bending and buckling of thin strain gradient elastic beams. Eur. J. Mech. A/Solids 29, 837–843 (2010)
Lim C.W., He L.H.: Size-dependent nonlinear response of thin elastic films with nano-scale thickness. Int. J. Mech. Sci. 46, 1715–1726 (2004)
Liu C., Rajapakse R.K.N.D.: Continuum models incorporating surface energy for static and dynamic response of nanoscale beams. IEEE Trans. Nanotech. 9, 422–431 (2010)
Liu, C., Rajapakse, R.K.N.D., Phani, A.S.: Finite element modeling of beams with surface energy effects. ASME J. Appl. Mech. 78, 031014-1–031014-10 (2011)
Lu P., He L.H., Lee H.P., Lu C.: Thin plate theory including surface effects. Int. J. Solids Struct. 43, 4631–4647 (2006)
Lü C.F., Wu D.Z, Chen W.Q.: Nonlinear responses of nanoscale FGM films including the effects of surface energies. IEEE Trans. Nanotech. 10, 1321–1327 (2011)
Ma H.M., Gao X.-L., Reddy J.N.: A microstructure-dependent Timoshenko beam model based on a modified couple stress theory. J. Mech. Phys. Solids 56, 3379–3391 (2008)
Ma H.M., Gao X.-L., Reddy J.N.: A non-classical Reddy–Levinson beam model based on a modified couple stress theory. Int. J. Multiscale Comput. Eng. 8, 167–180 (2010)
Ma H.M., Gao X.-L., Reddy J.N.: A non-classical Mindlin plate model based on a modified couple stress theory. Acta Mech. 220, 217–235 (2011)
Mahmoud F.F., Eltaher M.A., Alshorbagy A.E., Meletis E.I.: Static analysis of nanobeams including surface effects by nonlocal finite element. J. Mech. Sci. Tech. 26, 3555–3563 (2012)
McFarland A.W., Colton J.S.: Role of material microstructure in plate stiffness with relevance to microcantilever sensors. J. Micromech. Microeng. 15, 1060–1067 (2005)
Miller R.E., Shenoy V.B.: Size-dependent elastic properties of nanosized structural elements. Nanotechnology 11, 139–147 (2000)
Mindlin R.D.: Influence of couple-stresses on stress concentrations. Exp. Mech. 3, 1–7 (1963)
Mindlin R.D.: Micro-structure in linear elasticity. Arch. Ration. Mech. Anal. 16, 51–78 (1964)
Nix W.D., Gao H.: Indentation size effects in crystalline materials: a law for strain gradient plasticity. J. Mech. Phys. Solids 46, 411–425 (1998)
Nix W.D., Gao H.: An atomistic interpretation of interface stress. Scripta Mater. 39, 1653–1661 (1998)
Papargyri-Beskou S., Tsepoura K.G., Polyzos D., Beskos D.E.: Bending and stability analysis of gradient elastic beams. Int. J. Solids Struct. 40, 385–400 (2003)
Park S.K., Gao X.-L.: Bernoulli–Euler beam model based on a modified couple stress theory. J. Micromech. Microeng. 16, 2355–2359 (2006)
Park S.K., Gao X.-L.: Variational formulation of a modified couple stress theory and its application to a simple shear problem. Z. Angew. Math. Phys. 59, 904–917 (2008)
Shenoy V.B.: Size-dependent rigidities of nanosized torsional elements. Int. J. Solids Struct. 39, 4039–4052 (2002)
Shenoy, V.B.: Atomistic calculations of elastic properties of metallic fcc crystal surfaces. Phys. Rev. B 71, 094104-1–094104-11 (2005)
Steigmann D.J., Ogden R.W.: Plane deformation of elastic solids with intrinsic boundary elasticity. Proc. R. Soc. A 453, 853–877 (1997)
Steigmann D.J., Ogden R.W.: Elastic surface–substrate interactions. Proc. R. Soc. A 455, 437–474 (1999)
Timoshenko, S.P., Goodier, J.N.: Theory of Elasticity, 3rd edn. McGraw-Hill, New York (1970)
Wang L.: Size-dependent vibration characteristics of fluid-conveying microtubes. J. Fluids Struct. 26, 675–684 (2010)
Yang F., Chong A.C.M., Lam D.C.C., Tong P.: Couple stress based strain gradient theory for elasticity. Int. J. Solids Struct. 39, 2731–2743 (2002)
Yang, F.Q.: Size dependent effective modulus of elastic composite materials: spherical nanocavities at dilute concentrations. J. Appl. Phys. 95, 3516–3520 (2004)
Zhou S.-S., Gao X.-L.: Solutions of half-space and half-plane contact problems based on surface elasticity. Z. Angew. Math. Phys. 64, 145–166 (2013)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gao, XL., Mahmoud, F.F. A new Bernoulli–Euler beam model incorporating microstructure and surface energy effects. Z. Angew. Math. Phys. 65, 393–404 (2014). https://doi.org/10.1007/s00033-013-0343-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00033-013-0343-z